In Bombas Boyser, S.L. we focus on the needs of each client to offer the best solution in peristaltic pumps and lobular pumps. Today we want to show you the project made for Flowtec, with which we have been working for many years.
The final user is the company Sadaci, European leader in the production of Molybdenum (Mo), a raw material used in many innovative products, from stainless steel to smart phones. With approximately 150 employees, they produce various grades of molybdenum in North Sea Port that are used in the metal and steel industry, the chemical industry and the electronics industry.
Application Data
Calcium hydroxide dosing – DSulfuric acid 30% dosing – Precipation sludge
Product Delivered
4 units x FMP-50 (CHEMICAL VERSION)
Flow
Variable, from 870 to 2000 l/h
CHARACTERISTICS OF THE PERISTALTIC PUMPS MANUFACTURED FOR FLOWTEC
The FMP50 peristaltic pump has a roller design in place of the pressure shoe. The design of the roller does not require lubricant, it imparts less tension in the hose, which reduces the useful life of the hose. Therefore, operating costs are much lower compared to other technologies and other peristaltic pumps. That was one of the main reasons why the client selected our peristaltic pump: el costo de funcionamiento es muy bajo.
The hose leak detector is located at the lowest point of the pump, allowing it to shut off immediately after the hose breaks, which provides containment and prevents the housing from filling up with the product. This peristaltic pump is applied over a corrosive slurry and is supplied with the optional Halar coating (ECTFE), which is widely used in a wide variety of chemical processing applications.
WHAT ARE THE MAIN ADVANTAGES OF THE FMP SERIES PERISTALTIC PUMPS?
Our FMP series peristaltic pumps have numerous advantages that we specify below:
Easy operation:
- Low starting torque
- Smooth operation with very wide frequency range (from only 1 Hz.)
Efficiency:
- Low power consumption.
- Energy saving up to 30%.
Maintenance:
- Easy hose replacement.
- Smaller rotor.
- No lubricant needed.
Currently, we have a wide range of specialized distributors, being present in more than 80 countries. If you need advice or want to ask us any questions, you can contact us by calling us at 93 844 77 78 or sending an email to sale@blaspumps.com
